S7.8 - Repair by OBDII for 2007+ VW Golf, Passat, Eos, Touran, Tiguan, Octavia with Micronas

Product Information
Now with CarProg you can program Volkswagen and Skoda cars from year 2006.06 by OBDII diagnostic.
Supported cars:

• Golf, Golf+ from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer repair, PIN code read, EEPROM read/write;
• Passat B6  from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer repair, EEPROM read/write;
• Bora, Jetta  from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer repair, PIN code read, EEPROM read/write;
• Touran  from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer repair, PIN code read, EEPROM read/write;
• Caddy   from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer repair, PIN code read, EEPROM read/write;
• Tiguan, Eos  from year 2008+: odometer repair, PIN code read, EEPROM read/write;
• Octavia  (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM): odometer repair, PIN code read, EEPROM read/write;

• WORKS WITH MODELS TO YEAR 12/2008

C1 Car electronic testing on table adapter

If you see the immo lamp is on (immo is active)  or you see the message "Unknow version or Immo Active"  you must:

1. Remove dashboard from car and read it's eeprom 24C32 manualy (using carprog eeprom software and A6 adapter)
2. Save this eeprom dump to have backup
3. Fill eeprom dump :   - range 0x812 - 0x9BF in hex editor with FF FF ..
4. Write this damaged dump to eeprom (using carprog eeprom software and A6 adapter)
5. Put dashboard back to car and connect via DIAG now
6. Load your saved backup (original eeprom) and press write
7. After write compleate you can read PIN repair km etc..

after modification dump file's must look like :

[VAG with MICRONAS MCU + 24C32 inside] :

No need any additional adapter. Just buy software for your CarProg and activate it by internet. 

(without VAT)

• Tell a Friend