S5.49 - Airbag cleaner for Toyota, Lexus airbag sensors with Renesas R5F61721, R5F61723, R5F61725, R5F61727

Product Information
 CarProg software for Toyota and Subaru cars airbag sensor programming and "crash data erase". 
 Software advantage:

• You can repair all new software versions. Our software allow you to read and backup Renesas processor original flash data by OBDII and use it to restore airbag sensor after "crash erase". 

• read and backup Denso airbag sensors flash by OBDII;
• write/clear carsh data by direct connection with CarProg A10 adapter;
• read/erase DTC;
• read sensor ID and autodetect Renesas processor type;

• read and backup Denso airbag sensors flash by OBDII;
• write/clear carsh data by direct connection with CarProg A10 adapter;
• read/erase DTC;
• read sensor ID and autodetect Renesas processor type;

• connect CarProg using A1MULTI adapter to the car OBDII connector (if you have airbag sensor removed from car, you can connect it "on bench" using adapter C1 --- C1 must be modified - see how to modify C1 adapter  );
• read DTC - you will see airbag sensor ID and airbag sensor fault messages;
• read and backup Renesas processor flash memory;
• now go to next step - Erase Crash Data;
• now you must remove aibag sensor from car, open it and connect A10 adapter like in wiring diagram pictures;
• CarProg will detect Renesas processor type. Be sure that you have original flash backup saved!  Open this file and push "Write". After 5 minutes write procedure airbag sensor "crash data" will by be erase and flash memory restored. You can disconnect A10 and install sensor back to the car.

 

• Subaru PCB version V1: 

• Subaru PCB version V2: 

• Subaru PCB version V3: 

• Toyota PCB version V1: 

• Toyota PCB version V2: 

• Toyota PCB version V3: 

• Toyota PCB version V6: 

• Toyota PCB: 

 

(without VAT)

• Tell a Friend