SPEEDSTOP for Subaru - Plug and Play KM freezer for Subaru Ascent, Outback 2020

Product Information
 For Subaru cars year 2019+ cars drive test or dyno test. While car drive test is possible to stop (freeze) odometer counting. 

Works with :

• Ascent 2017+;
• Outback 2020+; 
• Legacy 2020+;

How to install:
Plug and Play device with easiest connection way possible, no soldering is required in the installation process. Remove instrument cluster. Disconnect cluster connector. Now connect SPEEDSTOP female connector to cluster. SPEEDSTOP male connector connect to car cluster connector. 
 

Speedometer works correctly all time in SPEEDSTOP mode, just odometer not counting.

Using SPEEDSTOP on Subaru Ascent 2018+: (High beam light on cluster will blink every time when working mode are changed­): 

• Push 4x High beam light switch (lights must be switched OFF) (High beam light on cluster will blink 1x )  = Odometer freezed, speedometer, cruise other functions works fine;
• Push 4x High beam light switch (lights must be switched OFF) (High beam light on cluster will blink 2x )  = SPEEDSTOP function is OFF, instrument cluster works like usually;

Using SPEEDSTOP on Subaru Outback 2020+: (No any indication on cluster when working mode are changed­ - just check odometer trip - must stop to count km): 

• Push 4x High beam light switch (lights must be switched OFF)   = Odometer freezed, speedometer, cruise other functions works fine;
• Push 4x High beam light switch (lights must be switched OFF)   = SPEEDSTOP function is OFF, instrument cluster works like usually;

After Ignition OFF/ON SPEEDSTOP keeps selected working mode.

If you remove SPEEDSTOP adapter after test drive, odometer not changing.

Price: €210.00 (without VAT)

• Tell a Friend